More Views

DIY 2000kg TANDEM KIT. 12" L/C PATTERN HYDRAULIC DISC BRAKES. SLIPPER SPRINGS

SKU : 192958687569
$860.00

Available



Shopping can be estimate during check out

Details

DIY TANDEM TRAILER KIT

SLIPPER SPRING SUSPENSION, 12" L/C HYDRAULIC DISC BRAKES & 40MM SQUARE AXLES

2000KG RATED

 

AVAILABLE STUD PATTERNS

6 STUD LANDCRUISER (6/139.7 PCD)

5 STUD LANDCRUISER (5/150 PCD)

 

 

 

IN THIS KIT

2X 40MM SQUARE AXLES. 1 WITH 12" DISC BRAKE MOUNTS WELDED TO AXLE, 1000KG RATED EACH (PLEASE SPECIFY AXLE LENGTH OR IF YOUR NOT SURE ASK US)AVAILABLE IN 60", 63", 64", 65", 66, 67", 68", 69", 70", 71", 73", 75", 77", 78", 79", 81", 83",85", 87", 89", 91", 94", 96" ( TIP TO TIP) 

2X HYDRAULIC CALIPERS WITH STAINLESS STEEL PISTONS

2 X DISC HUBS WITH LM BEARING KITS. AVAILABLE IN 5 OR 6 STUP LANDCRUISER PATTERN

2X LAZY HUBS WITH LM BEARING KITS

ALL WHEEL NUTS

 4X 6 LEAF SLIPPER SPRINGS 2000KG RATING WITH NYLON BUSHES (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)

2X FRONT HANGERS

2X REAR HANGERS

2X MIDDLE LARGE HANGERS

4X AXLE PADS

16X SPRING WASHERS AND NUTS FOR U BOLTS

1X 2000KG OVERRIDE BALL COUPLING

1X 3/4 MASTER CYLINDER BRACKET

1X 3/4 MASTER CYLINDER WITH MOUNT BOLTS

1X 4 HOLE COUPLING PLATE

4X COUPLING BOLTS AND NUTS

ALL COPPER FITTINGS AND T PIECES TO COMPLETE AXLE AND FINISH OFF AT COUPLING WITH PRE FLARED LINES!!

1x TRAILER BUNDY TUBE HYDRAULIC BRAKE LINE AND NUTS 2.5M.  DOUBLE FLARED1x TRAILER BUNDY TUBE HYDRAULIC BRAKE LINE AND NUTS 1.5M.  DOUBLE FLARED1x TRAILER BUNDY TUBE HYDRAULIC BRAKE LINE AND NUTS 500MM.  DOUBLE FLARED

Please check coupling to axle hydraulic line length.  if longer is required please get in contact with

 

 

 upgrade to the easy instillation hydraulic line setup.

 

 

upgrade to the easy instillation hydraulic line setup. 

12ft set up: $55 (CLICK ON LINK BELOW)

16ft set up: $65 (CLICK ON LINK BELOW)

 

"UPGRADE TO 12FT FULL FLEXI KIT BY CLICKING HERE"

"UPGRADE TO 16FT FULL FLEXI KIT BY CLICKING HERE"   

 

EXTRAS AVAILABLE

2" OR 4" DROP AXLES $295 EACH AXLE

ASSEMBLE OF AXLE $50 PER AXLE

  

BEARING OPTIONS

 UPGRADE TO JAPANESE BEARINGS $80.0 (CLICK ON LINK BELOW)

 

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

 

SHOT PEENING

Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.

  

NOT SURE THE AXLE SIZE YOU NEED? ASK US?