More Views

1400KG DIY Off Road Trailer Kit. Electric Brakes. Outback Springs, Stub Axles

SKU : 192664835677
$700.00

Available



Details

DIY OFF ROAD TRAILER KIT


OUTBACK OFFROAD SPRINGS


1400KG RATED

  

 

PCD's Availble
6/114.3, 6/139.7, 5/150, 5/114.3, 5/120, 5/108, 5/20.65, 5/139.7

  

IN THIS KIT

2X 45MM X 250MM SQUARE MACHINED STUB AXLES TO FIT INTO 50MM X 5MM RHS WITH ELECTRIC BRAKE MOUNTS WELDED, ALSO COMES WITH SPLIT PINS & WASHERS

2X 7 LEAF 60MMX7MM OFF ROAD BLACK SPRINGS WITH DAMPNERS (RATED 1600KG) (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)

2X FRONT HEAVY DUTY HANGERS HANGERS

2X REAR EYE EXTRA STRENGTHENED HANGERS

2X OFF ROAD FISH PLATES

4X  50MMX 150MM OFF ROAD 5/8" HIGH TENSILE U BOLTS

2X GREASABLE HIGH TENSILE SHACKLE PLATES WITH SHACKLE BOLTS WELDED

2X GREASABLE HIGH TENSILE SHACKLE PINS

2X AXLE PADS

1X LEFT HAND 10" BRAKE BACKING PLATE WITH HAND BRAKE LEVER

1X RIGHT HAND 10" BRAKE BACKING PLATE WITH HAND BRAKE LEVER

2X 10" HUB DRUMS WITH CUPS ALREADY PRESSED IN (AVAILABLE IN 6 STUD LANDCRUISER, 6 STUD D40/NP300, 5 STUD LANDSCRUISER, 5 STUD JEEP/F100, 5 STUD FORD, 5 STUD COMMODORE, 5 STUD HT OR 5 STUD HQ)

2X BEARING SETS (2X SLIM LINE INNER BEARINGS, 2X SLIM LINE OUTER BEARINGS, 2X WASHERS, 2X SPLIT PINS, 2X DUST SEALS, 2X DUST CAPS)

1X 3500KG 4 HOLE ELECTRIC BALL COUPLING

4X HIGH TENSILE BOLTS WITH NYLOC NUTS

1X 4 HOLE COUPLING BASE PLATE

8 METRES 4MM HAND BRAKE CABLE

2X CABLE CLAMPS

1X CABLE ADJUSTER



 

 

PLEASE COMPARE THE QUALITY AND STRENGTH OF THE OFF ROAD SPRING SETS TO OTHER SUPPLIERS!!

 

 

BEARING OPTIONS

 UPGRADE TO JAPANESE BEARINGS $40.0 (CLICK ON LINK BELOW)

 

 

 

"CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

 

PLEASE SEE OFF ROAD SPRING SET UP BELOW

Long Part of spring to the front, move rear hanger 25mm towards the rear,

Centre to centre of the hangers needs to be 25mm greater than centre to centre of the springs

 photo ELECTRICMOUNTSWELD 002_zpsstkzcsrg.jpg

 

SHOT PEENING

Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.