2000KG DIY Off Road Trailer Kit. Outback Springs, Electric Brakes. Electric Coupling

SKU : 192663760748
$1,240.00

Available



Details

DIY OFF ROAD TRAILER KIT
OUTBACK OFF ROAD SPRINGS
2000KG RATED

  

Stud Patterns Availble
6 STUD LANDCRUISER (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD LANDCRUISER (5/150 PCD, 9/16" STUDS AND NUTS)

 

IN THIS KIT
1X 50M SQUARE 12" ELECTRIC BRAKED AXLE WITH 2 TONNE BEARINGS
AXLE TAKES APPROX 5 BUSINESS DAYS TO ENGINEER (axle available in any length up to 2500mm tip to tip or 2325mm hub face to hub face)
2X 9 LEAF 60MMX7MM OFF ROAD BLACK SPRINGS WITH REBOUND STRAPS, RATED 2000KG (springs are shot peened for extra strength)
2X FRONT HEAVY DUTY HANGERS
2X REAR EYE HANGERS WITH EXTRA STRENGTH WELD IN BRACKETS
2X OFF ROAD FISH PLATES
4X OFF ROAD 50MM X 170MM 5/8"HIGH TENSILE U BOLTS WITH NUTS AND WASHERS
2X HIGH TENSILE REAR DOUBLE SHACKLE BOLT SETUPS (WITH GREASE NIPPLES)
2X HIGH TENSILE FRONT SHACKLE PINS WITH GREASE NIPPLES
2X AXLE PADS
1X LEFT HAND 12" BRAKE BACKING PLATE WITH HAND BRAKE LEVER
1X RIGHT HAND 12" BRAKE BACKING PLATE WITH HAND BRAKE LEVER
2X 12" HUB DRUMS WITH CUPS ALREADY PRESSED IN (AVAILABLE IN 6 AND 5 STUD LANDCRUISER)
2X 2 TONNE BEARING SETS INCLUDING DUST CAPS AND DUST SEALS
1X 3500KG 4 HOLE ELECTRIC BALL COUPLING WITH HANDBRAKE LEVER
4X HIGH TENSILE COUPLING BOLTS WITH NYLOC NUTS
1X 4 HOLE COUPLING BASE PLATE
8 METRES 4MM HAND BRAKE CABLE (LET US KNOW IF LONGER IS REQUIRED)
2X CABLE CLAMPS
1X CABLE ADJUSTER

ON PURCHASING PLEASE PROVIDE YOUR AXLE LENGTH AND STUD PATTERN

 

Axles In this kit will come assembled saving you much time and headache

 

EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295
JAPANESE KOYO BEARINGS $80 (CLICK ON LINK BELOW)

 

BEARING OPTIONS

UPGRADE TO JAPANESE BEARINGS $80.0 (CLICK ON LINK BELOW)


 "UPGRADE TO JAPANESE MANUFACTURED BEARINGS BY CLICKING HERE"

 

PLEASE SEE OFF ROAD SPRING SETUP SET UP BELOW

Long Part of spring to the front, move rear hanger 25mm towards the rear,

Centre to centre of the hangers needs to be 25mm greater than centre to centre of the springs

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses