6 Stud DIY 1400KG Trailer Kit Eye to Eye Springs Electric Brakes. Koyo Bearings

DIY 1400KG SINGLE AXLE TRAILER KIT (6/139.7 AND 6/114.3 PCD)

ELECTRIC BRAKES, EYE TO EYE SPRINGS

AVAILABLE IN LANDCRUISER, HILUX, RANGER, D40, PATHFINDER, NP300 ETC STUD PATTERN

IN THIS KIT

1X 45MM SQUARE SOLID AXLE WITH ELECTRIC MOUNTS ALREADY WELDED , ALSO COMES WITH SPLIT PINS & WASHERS. AVAILABLE IN 64", 65", 66, 67", 68", 69", 70", 71", 73", 75", 77", 78", 79", 81", 83",85", 87", 89", 91", 93", 94", 96" ( TIP TO TIP)

1X LEFT HAND 10" BRAKE BACKING PLATE WITH HAND BRAKE LEVER

1X RIGHT HAND 10" BRAKE BACKING PLATE WITH HAND BRAKE LEVER

2X 10" HUB DRUMS

drums come with cups already inserted.

2X SLIMLINE JAPANESE KOYO BEARING SETS INCLUDES DUST SEALS AND DUST CAPS

2X 7 LEAF 60MM X 6MM BLACK EYE TO EYE SPRINGS (RATED 1550KG)(SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)

2X FRONT SHACKLE HANGERS

2X REAR SHACKLE HANGERS WITH EXTRA STRENGTH GUSSET SUPPORTS

2 x DOUBLE REAR HIGH TENSILE SHACKLE BOLTS WITH GREASE NIPPLES

2X 6MM FISH PLATES

4X 45X 155MM U BOLTS WITH SPRING WASHERS AND NUTS

2X AXLE PADS

3500KG 4 HOLE BALL COUPLING

4X HIGH TENSILE BOLTS WITH NYLOC NUTS

4 HOLE COUPLING BASE PLATE

8 METRES 4MM HAND BRAKE CABLE

2X CABLE CLAMPS

1X CABLE ADJUSTER AND STAINLES BOLT WITH NYLOC NUTS

NOT SURE THE AXLE SIZE YOU NEED? ASK US?

SHOT PEENING

Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.