DIY 2000Kg Mechanical Disc Braked Boat trailer Kit. Gal 45mm Axles, R/Roller Springs

SKU : 193322387189
$1,494.00

Available



Details

MECHANICAL DISC TANDEM TRAILER KIT.
2000KG RATED.
ROCKER ROLLER SPRINGS AND 45MM AXLES


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $60 12" DISCS
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$60 12" DISCS


IN THIS KIT
1X 45MM GALVANISED SQUARE AXLE WITH MECHANICAL FLANGES WELDED ( AVAILABLE IN 64", 65", 66, 67", 68", 69", 70", 71", 73", 75", 77", 78", 79", 81", 83", 85", 87", 89", 91", 93", 94", 96" ( TIP TO TIP) (PLEASE NOTE THE FLANGES ARE WELDED TO AXLE AFTER IT IS GALVANISED AND COLD GALVANISE IS APPLIED WHERE THE FLANGES HAVE BEEN WELDED) RATED 1400KG
1X 45MM GALVANISED SQUARE BARE AXLE. RATED 1400KG
2X GALVANISED MECHANICAL BRAKE CALIPERS
4X BRAKE PADS
2X 10" GALVANISED DACROMET BRAKE DISCS. (CUPS ALREADY INSERTED INTO DRUMS)
2X GALVANISED DACROMET LAZY HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X SLIMLINE BEARING KITS INCLUDING MARINE SEALS AND DUST CAPS
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
1X 5 LEAF GALVANISED ROCKER ROLLER LOAD SHARING SPRING SET WITH ALL GREASABLE HIGH TENSILE SHACKLE BOLTS & STEEL BUSHES. (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
4X GALVANISED FISH PLATES
8X GALVANISED 1/2" U BOLTS WITH NUTS AND WASHERS
4X GALVANISED AXLE PADS
1X 2000KG GALVANISED OVERRIDE 50MM BALL COUPLING
1X MARINE MECHANICAL BRAKE LEVER (AVAILABLE TO SUIT 100MM OR 75MM WIDE DRAW BAR. 100MM WILL COME STANDARD UNLESS ADVISED OTHERWISE)
1X 8 METRES 4MM BRAKE CABLE (PLEASE LET US KNOW IF LONGER IS REQUIRED)
1X CABLE ADJUSTER
2X CABLE CLAMPS
1X 4 HOLE WELD ON COUPLING PLATE
4X HIGH TENSILE COUPLING BOLTS AND NYLOC NUTS
On ordering please provide your stud pattern and axle length?


EXTRAS AVAILABLE
JAPANESE MANUFACTURED BEARINGS $80 (CLICK ON LINK BELOW)
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES TAKE APPROX 5 BUSINESS DAYS
ASSEMBLE OF AXLE $50 PER AXLE
GALVANISED GULLWING AXLES $180 EACH

 

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"


DACROMET
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder


SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.