DIY 2000Kg Mechanical Disc Braked Boat trailer Kit. Stub Axles, R/Roller Spring

SKU : 360649618112
$1,200.00

Available



Details

DIY MECHANICAL DISC TANDEM TRAILER KIT
2000KG RATED
ROCKER ROLLER SPRINGS, 45MM SPECIALLY MACHINED STUB AXLES TO SLEEVE INTO 50MM R.H.S

 

IN THIS KIT

2X 45MM X 250MM SQUARE STUB AXLES MACHINED TO SLEEVE INTO 50MM X 50MM X 5MM R.H.S WITH MECHANICAL FLANGES WELDED

2X 45MM X 250MM SQUARE STUB AXLES MACHINED TO SLEEVE INTO 50MM X 50MM X 5MM R.H.S 

2X GALVANISED MECHANICAL BRAKE CALIPERS

2X 10" FORD, HOLDEN HT, HOLDEN HQ or COMMODORE GALVANISED BRAKE DISCS. (CUPS ALREADY INSERTED INTO DRUMS)

2X GALVANISED LAZY FORD, HOLDEN HT, HOLDEN HQ OR COMMODORE HUBS (CUPS ALREADY INSERTED INTO DRUMS)

4X SLIMLINE BEARING KITS INCLUDING MARINE SEALS AND CAPS

20 X WHEEL NUTS

5 LEAF GALVANISED ROCKER ROLLER LOAD SHARING SPRING SET WITH HIGH TENSILE SHACKLE BOLTS, STEEL BUSHES, GREASABLE SHACKLE BOLTS AND COMES ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)

4X GALVANISED FISH PLATES

8X GALVANISED 50MM X 150MM 1/2" U BOLTS

4X GALVANISED AXLE PADS

1X 2000KG GALVANISED OVERRIDE BALL COUPLING

1X GALVANISED 75MM DRAWER BAR LEVER, 100MM DRAWER BAR LEVER OR GALVANISED MECHANICAL BASE PLATE WITH LEVER (PLEASE LET US KNOW WHICH IS REQUIRED)

8 METRES BRAKE CABLE (PLEASE LET US KNOW IF LONGER IS REQUIRED)

2X CABLE CLAMPS

1X CABLE ADJUSTER

4X HIGH TENSILE COUPLING BOLTS WITH NYLOC NUTS

 

 

EXTRAS AVAILABLE

GALVANISED 5 OR 6 STUD LANDCRUISER 12" DISCS + $60

JAPANESE MANUFACTURED BEARINGS $80 (CLICK ON LINK BELOW)

GALVANISED GULLWING AXLES $180 EACH

 

BEARING OPTIONS

 UPGRADE TO JAPANESE BEARINGS $80.0 (CLICK ON LINK BELOW)

 

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

 

SHOT PEENING

Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.

 

DACROMET®

DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.