DIY 2000Kg Mechanical Disc Braked Boat trailer Kit. Stub Axles, Slipper Springs

SKU : 171035091746
$939.00

Available



Details

DIY 2000KG MECHANICAL DISC TANDEM TRAILER KIT
SLIPPER SPRINGS
SPECIALLY MACHINED STUBS TO SLEEVE INTO 50MM R.H.S


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $60 12" DISCS
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$60 12" DISCS


IN THIS KIT
2X 45MM X 250MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S WITH MECHANICAL DISC MOUNTS WELDED
2X 45MM X 250MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S
2X GALVANISED MECHANICAL BRAKE CALIPERS WITH
4X BRAKE PADS
2X 10" GALVANISED DACROMET BRAKE DISCS. (CUPS ALREADY INSERTED INTO DRUMS)
2X GALVANISED DACROMET LAZY HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X SLIMLINE BEARING KITS INCLUDING MARINE SEALS AND DUST CAPS
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
4X 6 LEAF GALVANISED DACROMET SLIPPER SPRINGS. RATED 1200KG PER PAIR (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT SLIPPER HANGERS
2X REAR SLIPPER HANGERS
2X MIDDLE LARGE MIDDLE HANGERS
4X STAINLESS STEEL SLIPPER HANGER BOLTS WITH NUTS AND WASHERS
2X GALVANISED FISH PLATES
4X GALVANISED 50MM X 150MM 1/2" U BOLTS WITH NUTS AND WASHERS
2X GALVANISED AXLE PADS
1X 2000KG GALVANISED OVERRIDE 50MM BALL COUPLING
1X MARINE MECHANICAL BRAKE LEVER (AVAILABLE TO SUIT 100MM OR 75MM WIDE DRAW BAR. 100MM WILL COME STANDARD UNLESS ADVISED OTHERWISE)
1X 8 METRES 4MM BRAKE CABLE (PLEASE LET US KNOW IF LONGER IS REQUIRED)
1X CABLE ADJUSTER
2X CABLE CLAMPS
1X 4 HOLE WELD ON COUPLING PLATE
4X HIGH TENSILE COUPLING BOLTS AND NYLOC NUTS
On ordering please provide your stud pattern?

EXTRAS AVAILABLE
JAPANESE MANUFACTURED BEARINGS $80 (CLICK ON LINK BELOW)
GALVANISED 5 OR 6 STUD LANDCRUISER PATTERN + $60
GALVANISED GULLWING AXLES $180 EACH

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.


DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.