DIY 2000kg Tandem Trailer Kit Electric Brakes slipper Springs Japanese Bearings

SKU : 173503707045
$1,036.00

Available



Details

DIY TANDEM TRAILER KIT
WITH SLIPPER SPRINGS, ELECTRIC BRAKES AND 40MM SQUARE AXLES.
2000KG RATED.
KOYO BEARINGS


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS)
D40/NP300/PATHFINDER (6/114.3 PCD, 1/2" STUDS AND NUTS)
F100/JEEP (5/127 PCD, 1/2" STUDS AND NUTS)


NOT SURE THE AXLE SIZE YOU NEED? ASK US?


IN THIS KIT
1X 40MM SQUARE AXLE WITH ELECTRIC BRAKE MOUNTS WELDED TO AXLE, 1000KG RATED. ( AVAILABLE IN 60", 63",64", 65", 66, 67", 68", 69", 70", 71", 73", 75", 77", 78", 79", 81", 83",85", 87", 89", 91", 93", 94", 96" ( TIP TO TIP) IF YOUR NOT SURE ON YOUR AXLE LENGTH THEN ASK US
1X 40MM SQUARE BARE AXLE , 1000KG RATING (axle lengths same as above)
2X 10" ELECTRIC BACKING PLATES WITH WASHERS AND NUTS FOR FIXING TO BRAKE MOUNTS (come with handbrake levers)
2X 10" ELECTRIC BRAKE DRUMS. (CUPS ALREADY INSERTED INTO DRUMS)
2X LAZY HUBS HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X LM JAPANESE KOYO BEARING KITS INCLUDING SEALS AND CAPS
ALL WHEEL NUTS
4X 6 LEAF SLIPPER SPRINGS WITH NYLON BUSHES. RATED 1200KG PER PAIR (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT SLIPPER HANGERS
2X REAR SLIPPER HANGERS
2X MIDDLE LARGE SLIPPER HANGERS
4X UNIVERSAL FISH PLATES
8X 40MM X 150MM 1/2" U BOLTS
4X AXLE PADS
16X WASHERS AND NUTS FOR U BOLTS
1X 3500KG ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
1X 8 METRES HAND BRAKE CABLE (LET US KNOW IF LONGER IS REQUIRED
1X CABLE ADJUSTER
1X 4 HOLE COUPLING WELD ON PLATE
2X CABLE CLAMPS
4X 12MM HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
ON PURCHASING PLEASE PROVIDE YOUR STUD PATTERN


EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES APPROX. 5 BUSINESS DAYS TO ENGINEER
NATURAL FINISH GULLWING AXLES $150 EA
ASSEMBLE OF AXLE $50 PER AXLE

 



SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.