DIY 2000kg TANDEM TRAILER SUSPENSION KIT. HYDRAULIC DISC BRAKES. ROCKER ROLLER SPRINGS

SKU : 180917932794
$1,150.00

Available



Details

DIY TANDEM TRAILER KIT

ROCKER ROLLER LOAD SHARING SUSPENSION, HYDRAULIC DISC BRAKES & 45MM SQUARE AXLES

2000KG

 

 

IN THIS KIT

2X 45MM SQUARE AXLES. 1 WITH DISC BRAKE MOUNTS WELDED TO AXLE, 1400KG RATED EACH (PLEASE SPECIFY AXLE LENGTH OR IF YOUR NOT SURE ASK US)AVAILABLE IN 64", 65", 66, 67", 68", 69", 70", 71", 73", 75", 77", 78", 79", 81", 83",85", 87", 89", 91", 93", 94", 96" ( TIP TO TIP) 

2X HYDRAULIC CALIPERS WITH STAINLESS STEEL PISTONS

2 X DISC HUBS WITH SLIMLINE BEARING KITS. AVAILABLE IN FORD, COMMODORE, HT AND HQ.

6 AND 5 STUD LANDCRUISER PATTERN AVAILABLE EXTRA $40

2X LAZY HUBS WITH SLIMLINE BEARING KITS

24 X WHEEL NUTS

5 LEAF 2.5 TONNE ROCKER ROLLER SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)

4X UNIVERSAL FISH PLATES

8X 45MMX 130MM 1/2" SQUARE U BOLTS

4X AXLE PADS

16X SPRING WASHERS AND NUTS FOR U BOLTS

1X 2000KG OVERRIDE BALL COUPLING

1X 3/4 MASTER CYLINDER BRACKET

1X 3/4 MASTER CYLINDER WITH MOUNT BOLTS

1X 4 HOLE COUPLING PLATE

4X COUPLING BOLTS AND NUTS

ALL COPPER FITTINGS AND T PIECES TO COMPLETE AXLE AND FINISH OFF AT COUPLING WITH PRE FLARED LINES!!

1x TRAILER BUNDY TUBE HYDRAULIC BRAKE LINE AND NUTS 2.5M.  DOUBLE FLARED1x TRAILER BUNDY TUBE HYDRAULIC BRAKE LINE AND NUTS 1.5M.  DOUBLE FLARED1x TRAILER BUNDY TUBE HYDRAULIC BRAKE LINE AND NUTS 500MM.  DOUBLE FLARED

Please check coupling to axle hydraulic line length.  if longer is required please get in contact with

 

 

 upgrade to the easy instillation hydraulic line setup.

 

 

upgrade to the easy instillation hydraulic line setup. 

12ft set up: $55 (CLICK ON LINK BELOW)

16ft set up: $65 (CLICK ON LINK BELOW)

 

"UPGRADE TO 12FT FULL FLEXI KIT BY CLICKING HERE"

"UPGRADE TO 16FT FULL FLEXI KIT BY CLICKING HERE"   

 

EXTRAS AVAILABLE

2" OR 4" DROP AXLES $200 EACH AXLE

ASSEMBLE OF AXLE $50 PER AXLE

6 STUD PATTERN $40

 

 

 

BEARING OPTIONS

 UPGRADE TO JAPANESE BEARINGS $80.0 (CLINK ON LINK BELOW)

 

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

 

SHOT PEENING

Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.

  

NOT SURE THE AXLE SIZE YOU NEED? ASK US?