DIY 3500Kg Tandem Trailer Caravan Kit. 12" Electric Brakes. Engineered Axles

DIY TANDEM TRAILER KIT
3500KG RATED
ROCKER ROLLER LOAD SHARING SUSPENSION, DUAL AXLE 12 INCH ELECTRIC BRAKES AND 50MM SQUARE AXLES. 2 TONNE BEARINGS


Stud Patterns Available
6 STUD LANDCRUISER (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD LANDCRUISER (5/150 PCD, 9/16" STUDS AND NUTS)


THIS KIT IS LEGALLY RATED FOR A TANDEM 3500KG TRAILER.


IN THIS KIT
2X 50MM SQUARE 2000KG COMPLETE ASSEMBLED 12" ELECTRIC BRAKED AXLES. 30210 AND 15123 BEARINGS INSTALLED
AXLES TAKE APPROX 5 DAYS TO BE ENGINEERED (available any length up to 2500mm tip to tip / 2325mm hub face to hub face)
1x 7 LEAF 3.5 TONNE LOAD SHARING ROCKER ROLLER SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
8X HEAVY DUTY OFF ROAD UNIVERSAL FISH PLATES
8X 5/8" 50 SQ HIGH TENSILE U BOLTS WITH NUTS AND WASHERS
4X AXLE PADS
1X 3500KG 50MM ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
1X 8 METRES HAND BRAKE CABLE (PLEASE LET US KNOW IF MORE CABLE IS REQUIRED)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING PLATE
2X CABLE CLAMPS
4X 12MM HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
1X BRAKE AWAY UNIT
ON PURCHASING PLEASE PROVIDE YOUR AXLE LENGTH AND STUD PATTERN


EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES APPROX 5 DAYS TO ENGINEER
JAPANESE MANUFACTURED BEARINGS $160 (CLICK ON LINK BELOW)

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.