DIY 4500Kg Tandem Trailer Caravan Kit. 12" Electric Brakes. Engineered Axles

DIY TANDEM TRAILER KIT
4500KG RATED
ROCKER ROLLER LOAD SHARING SUSPENSION, 12 INCH ELECTRIC BRAKES AND 65MM ROUND 3 TONNE AXLES

Stud Patterns Available
6 STUD LANDCRUISER (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD LANDCRUISER (5/150 PCD, 9/16" STUDS AND NUTS)

THIS KIT IS LEGALLY RATED FOR A TANDEM 4500KG TRAILER.


IN THIS KIT
2X 65MM ROUND 3000KG COMPLETE ASSEMBLED 12" ELECTRIC BRAKED AXLES. 30210 INNER AND 29749 OUTER BEARINGS INSTALLED
AXLES TAKE APPROX 5 DAYS TO BE ENGINEERED (available any length up to 2500mm tip to tip / 2320mm hub face to hub face)
1X 9 LEAF 4.5 TONNE LOAD SHARING ROCKER ROLLER SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
8X HEAVY DUTY UNIVERSAL FISH PLATES
8X 5/8" 65MM ROUND HIGH TENSILE U BOLTS
4X AXLE PADS
16X WASHERS AND NUTS FOR U BOLTS
1X 4500KG 70MM ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
1X 8 METRES HAND BRAKE CABLE (PLEASE LET US KNOW IF MORE CABLE IS REQUIRED)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING WELD ON PLATE
2X CABLE CLAMPS
4X 12MM HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
1X BRAKE AWAY UNIT
ON PURCHASING PLEASE PROVIDE YOUR AXLE LENGTH AND STUD PATTERN

Axles In this kit will come assembled saving you much time and headache

BEARING OPTIONS
UPGRADE TO JAPANESE BEARINGS $160.0 (CLICK ON LINK BELOW)
UPGRADE TO 63MM SQUARE SOLID AXLES $200 PER AXLE

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.