DIY TRI AXLE TRAILER KIT. 4500KG RATED. 2 TONNE AXLES

SKU : 190682100512
$3,550.00

Available



Details

DIY TRI AXLE TRAILER KIT
ROCKER ROLLER LOAD SHARING SUSPENSION, 12" 2 TONNE ENGINEERED AXLES
4500KG RATED.


Stud Patterns Available
6 STUD LANDCRUISER (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD LANDCRUISER (5/150 PCD, 9/16" STUDS AND NUTS)


IN THIS KIT
3X 50MM SQUARE 2000KG COMPLETE GREASED AND ASSEMBLED 12" ELECTRIC BRAKED AXLES. 30210 AND 15123 BEARINGS INSTALLED
AXLES TAKE APPROX 5 DAYS TO BE ENGINEERED (available any length up to 2500mm tip to tip / 2325mm hub face to hub face)
1X 9 LEAF 6 TONNE LOAD SHARING TRI AXLE ROCKER ROLLER SPRING SET WITH GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED. RATED 6750KG. (springs are shot peened for extra strength)
6X UNIVERSAL 5/8" OFF ROAD FISH PLATES
16 X 50MMX 170MM SQUARE 5/8" HIGH TENSILE U BOLTS WITH NUTS AND WASHERS
6 X AXLE PADS
1X 4500KG ELECTRIC BALL COUPLING WITH HANDBRAKE LEVER (6000KG RING COUPLING AVAILABLE UPON REQUEST FOR NO EXTRA CHARGE)
1 X 8 METRES HAND BRAKE CABLE (LET US KNOW IF LONGER IS REQUIRED)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING PLATE
2X CABLE CLAMPS
4 X 12MM HIGH TENSILE BOLTS WITH NUTS AND WASHERS FOR COUPLING
1X BRAKE AWAY UNIT
On ordering please supply your stud pattern and axle length

 

EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE DROP AXLES APPROX 5 DAYS TO ENGINEER
JAPANESE MANUFACTURED BEARINGS $240 (HIGHLY RECOMMENDED)

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.