HUNTSMAN PRODUCTS OFF ROAD INDEPENDENT SHOCK AND COIL SUSPENSION.
WITH IRON MAN SHOCKS AND COILS!
*2X INDEPENDENT SWING ARMS & GREASABLE HINGE BAR WITH NEOPRENE BUSHES.
45MM SQUARE STUB AXLES WILL BE WELDED ON OR IN THE ARM (TO SUIT YOUR OFFSET) WITH BRAKE MOUNTS ALREADY WELDED. SUSPENSION COMES IN A NATURAL FINISH
*4 X NEOPRENE BUMP STOPS.
*4X COIL BRACKETS. ( 2 ALREADY WELDED TO SWING ARM)
*2X IRONMAN 1250KG RATED COILS WITH MOUNTING BRACKETS, HIGH TENSILE BOLTS AND ALL HARDWARE
*2X NITRO GAS IRONMAN SHOCKS
*4X 5mm SHIMS (only needed for some alignments)
* CHOICE OF 10" ELECTRIC. 9" HYDRAULIC OR 9" MECHANICAL BRAKE KITS COMPLETE WITH ALL BACKING PLATES, DRUMS, BEARINGS, SEALS, CAPS AND NUTS. (IF ELECTRIC BRAKES IS CHOSEN THEN OFF ROAD MAGNETS AND BACKING PLATES WILL BE USED)
* JAPANESE MANUFACTURED BEARING KITS
*2X REBOUND STRAPS WITH BOLTS AND NUTS (these go around the shocks)
*ALL HIGH TENSILE NUTS AND BOLTS NEEDED FOR THE KIT
* CAMBER & TOE IN ADJUSTMENT
STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS)
D40/NP300/PATHFINDER (6/114.3 PCD, 1/2" STUDS AND NUTS) (only with electric brakes)
F100/JEEP (5/127 PCD, 1/2" STUDS AND NUTS) (only with electric brakes)
Whats involved in setting up the suspension onto the chassis???
The team at Huntsman Products mount everything onto the swing arm before dispatch. So the hinge bar is bolted to the swing arm. The stub axle is welded on or into the swingarm. The coil bracket is welded to the hinge bar as is the rebound strap and shock brackets.
When you receive the suspension you will have to weld the hinge bar on top of a cross member as will be shown in the drawing we give you on purchase. The coil, rebound strap and shock brackets will also have to be welded to the chassis.
The brake mounts are pre welded to the stub axles. The cups are inserted into the drums or discs so it is a matter of greasing the bearings, assembling the brakes and drums to the stubs and you are done..
WE CAN SUPPLY WITH THE DOUBLE SHOCK SETUP FOR AN EXTRA $180
WE CAN ALSO SUPPLY THIS SUSPENSION WITH MECHANICAL OR HYDRAULIC DISC BRAKES. PLEASE INQUIRE FOR PRICES
ride height from centre of stub to chassis when under load is 190mm with the stub axle welded on top of swing arm or 260mm if the stub axle is welded into the arm.
On ordering we email both an offset job sheet and a fitment diagram for mounting the suspension to the chassis. Unfortunately we do need a deposit for these to be forwarded, so please don't take offence on these terms and conditions