TANDEM BOAT TRAILER HYDRAULIC DISC & DRUM BRAKE FLEXI HOSE LINE KIT

TANDEM HYDRAULIC DISC DRUM BRAKE FLEXI HOSE LINE KIT
FOR TANDEM TRAILERS WITH 2 BRAKED AXLES

The tandem braked axle complete hydraulic line makes setting up any hydraulic trailer brakes a breeze as everything is pre prepared. With no need for flaring and with the easiness of being able to bend around A frames or chassis without kinking this makes setting any hydraulic lines hassle free.

The idea is simple. We supply your 20ft flexi line from master cylinder (which includes olive nut) to the supplied T piece in between the first and second axle on the chassis rails. Then from the T piece you get a 2x 36" flexis running opposite ways down to meet a T piece on both front and back axles. From each T piece on the axles you then have the 22" and 72" flexi running off to the calipers or backing plates. Zip ties and retaining clips are supplied as any excess line not used can simply be rolled up and attached any where on the trailer or RV.


WHAT YOU RECEIVE
1X 20FT MAIN FLEXI LINE (FROM MASTER CYLINDER TO IN BETWEEN THE 2 AXLES ON THE CHASSIS RAIL)
2X 36" FLEXI LINES (FROM T PIECE IN BETWEEN THE 2 AXLE TO T PIECE ON EACH AXLE)
2X 72" AXLE FLEXI LINES (FROM T PIECE ON AXLE TO CALIPER OR BACKING PLATE)
2X 22" AXLE FLEXI LINES (FROM T PIECE ON AXLE TO CALIPER OR BACKING PLATE)
3X 3 WAY BRASS T PIECES
5X BRASS ADAPTORS 3/16" INV. FLARE X 1/8"
6X LINE RETAINING CLIPS
6X LINE RETAINING SCREWS
6X LINE STRAPS