More Views
DIY 2800Kg Hydraulic Disc Braked Boat trailer Kit. Stub Axles
SKU : 174096445716-6Available
Details
DIY HYDRAULIC DISC TANDEM TRAILER KIT.
2800KG RATED.
ROCKER ROLLER SPRINGS, SPECIALLY MACHINED STUBS AND ELECTRIC OVER HYDRAULIC ALKO IQ7.
STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $240 12" DISCS
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$240 12" DISCS
IN THIS KIT
4X 45MM X 250MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S BOX SECTION WITH 10" HYDRAULIC DISC BRAKE FLANGES WELDED
4X GALVANISED HYDRAULIC BRAKE CALIPERS WITH STAINLESS STEEL PISTONS AND ZINC MOUNT BOLTS
4X BRAKE PADS
4X 10" DACROMET GALVANISED BRAKE DISCS. 15MM THICK DISCS (CUPS ALREADY INSERTED INTO DISCS)
4X SLIMLINE BEARING KITS INCLUDING MARINE SEALS AND DUST CAPS.
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
1X 6 LEAF 3000KG GALVANISED DACROMET ROCKER ROLLER LOAD SHARING SPRING SET WITH ALL GREASABLE HIGH TENSILE SHACKLE BOLTS & STEEL BUSHES. (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
4X GALVANISED FISH PLATES
8X GALVANISED 50MM X 150MM 5/8" HIGH TENSILE U BOLTS WITH NUTS AND WASHERS
4X GALVANISED AXLE PADS
1X 3500KG GALVANISED DACROMET 50MM ELECTRIC BALL COUPLING
1X ALKO IQ7 ACTUATOR WITH BUILT IN BRAKEAWAY UNIT
1X 4 HOLE COUPLING WELD ON PLATE
4X HIGH TENSILE COUPLING BOLTS AND AND NYLOC NUTS
1X 6100MM COUPLING TO FRONT AXLE MAIN FLARED BUNDY LINE WITH NUTS (LET US KNOW IF LONGER IS REQUIRED)
2X 2000MM FLARED BUNDY LINE WITH NUTS
3X 500MM FLARED BUNDY LINE WITH NUTS
3X 400MM MALE / FEMALE FLEXI LINES
1X BRASS T PIECE
1X BRASS 4 WAY BLOCK
1X MASTER CYLINDER BRASS NUT AND WASHER
ALL BUNDY TUBING, FLEXI HOSES & BRASS FITTINGS TO COMPLETE BRAKES.
Please check coupling to front axle hydraulic line length. if longer is required please get in contact with us
On ordering please provide your stud pattern?
EXTRAS AVAILABLE
JAPANESE MANUFACTURED BEARINGS $100 (CLICK ON LINK BELOW)
GULL WING AXLES $180 PER AXLE
TANDEM RUBBER FLEXI KIT $90
TANDEM STAINLESS FLEXI KIT $160
HUNTSMAN STAINLESS CALIPERS AND DISCS (POA)
"CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"
SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.
DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.
Related Products
