DIY 4500Kg Tri Axle Tiny Home Trailer Kit Electric Brakes Solid Axles R/Roller White Wheels and Tyres.

DIY 4500KG TRI AXLE TINY HOME TRAILER KIT
ROCKER ROLLER LOAD SHARING SUSPENSION, 10" PARALLEL BRAKES, SOLID AXLES
7X 14" WHITE STEEL RIMS AND 185R14C TYRES


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS) MINIMUM 76MM CENTRE BORE ON RIM REQUIRED
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) MINIMUM 95MM CENTRE BORE ON RIM REQUIRED

AXLE LENGTHS AVAILABLE
PLEASE NOTE: Minimum clearance from hub face to chassis per side: 155mm
PLEASE NOTE: Hub face to back of Electric backing plate 155mm per side
1700MM TIP TO TIP (1583MM HUB FACE TO HUB FACE)
1750MM TIP TO TIP (1633MM HUB FACE TO HUB FACE)
1800MM TIP TO TIP (1683MM HUB FACE TO HUB FACE)
1850MM TIP TO TIP (1733MM HUB FACE TO HUB FACE)
1900MM TIP TO TIP (1783MM HUB FACE TO HUB FACE)
1950MM TIP TO TIP (1833MM HUB FACE TO HUB FACE)
2000MM TIP TO TIP (1883MM HUB FACE TO HUB FACE)
2050MM TIP TO TIP (1933MM HUB FACE TO HUB FACE)
2100MM TIP TO TIP (1983MM HUB FACE TO HUB FACE)
2150MM TIP TO TIP (2033MM HUB FACE TO HUB FACE)
2200MM TIP TO TIP (2083MM HUB FACE TO HUB FACE)
2250MM TIP TO TIP (2133MM HUB FACE TO HUB FACE)
2300MM TIP TO TIP (2183MM HUB FACE TO HUB FACE)
2350MM TIP TO TIP (2233MM HUB FACE TO HUB FACE)
2400MM TIP TO TIP (2283MM HUB FACE TO HUB FACE)
2435MM TIP TO TIP (2318MM HUB FACE TO HUB FACE)

CUSTOM AXLE LENGTHS UP TO 2500MM TIP TO TIP +$150 PER KIT
Custom Axle lengths will need to be manufactured which will take approx 5 extra business days for dispatch on top of the current dispatch times

IN THIS KIT
3X 50MM SQUARE PARALLEL ENGINEERED AXLES WITH ELECTRIC BRAKE MOUNTS WELDED TO AXLE, 1600KG RATED EACH
6X 10" ELECTRIC BACKING PLATES WITH WASHERS AND STAR NUTS FOR FIXING TO BRAKE MOUNTS (EACH BACKING PLATE COMES WITH BRAKE MOUNTS)
6X 10" PARALLEL 10" ELECTRIC BRAKE DRUMS. (CUPS ALREADY INSERTED INTO DRUMS)
6X PARALLEL BEARING KITS INCLUDING DUST SEALS AND DUST CAPS
ALL WHEEL NUTS
1X 6 LEAF 4.5 TONNE LOAD SHARING TRI AXLE ROCKER ROLLER SPRING SET WITH GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (springs are shot peened for extra strength)
6X UNIVERSAL OFF ROAD FISH PLATES
16 X 50MM X 150MM SQUARE 5/8" HIGH TENSILE U BOLTS WITH NUTS AND WASHERS
6 X AXLE PADS
1X 4500KG 70MM ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER (6000KG RING COUPLING AVAILABLE UPON REQUEST FOR NO EXTRA CHARGE)
COUPLING CTA APPROVAL NUMBER: CTA-061054
1 X 8 METRE HAND BRAKE CABLE (LET US KNOW IF LONGER IS REQUIRED?)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING WELD ON PLATE
2X CABLE CLAMPS
4 X 12MM HIGH TENSILE BOLTS WITH NUTS AND WASHERS FOR COUPLINGS
1X BRAKE AWAY UNIT

7 X 14" WHITE STEEL RIMS AND 185R14C TYRES
RIM PCD: 6/139.7 OR 5/114.3
REAR OFFSET WITH TYRE FITTED: APPROX 115MM
WHEEL LOAD RATING: 850KG EACH
TYRE SIZE: 185R14C
TYRE LOAD RATING: 102/100Q
KG RATING PER TYRE: 850KG
TYRE ROLLING DIAMETER: 650MM
On ordering please supply your stud pattern and axle length

EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES APPROX 5 DAYS TO ENGINEER
ASSEMBLE OF AXLE $50 PER AXLE
JAPANESE MANUFACTURED BEARINGS $150 (CLICK ON LINK BELOW)

" CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.