DIY 2000kg Tandem Trailer Kit. Electric Brakes Rocker roller Springs. 45mm Axles 78" - 96"

2000KG DIY TANDEM TRAILER KIT
ROCKER ROLLER LOAD SHARING SUSPENSION, ELECTRIC BRAKES AND 45MM SQUARE AXLES.
AXLE LENGTHS 78" - 96" (for longer axles SKU: 181090440483)

STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS)
D40/NP300/PATHFINDER (6/114.3 PCD, 1/2" STUDS AND NUTS)
F100/JEEP (5/127 PCD, 1/2" STUDS AND NUTS) (poa)

AVAILABLE LENGTHS
78", 1980mm TIP TO TIP (1880M HUB FACE TO HUB FACE)
79", 2005mm TIP TO TIP (1905M HUB FACE TO HUB FACE)
81", 2060mm TIP TO TIP (1960M HUB FACE TO HUB FACE)
83", 2110mm TIP TO TIP (2010M HUB FACE TO HUB FACE)
85", 2160mm TIP TO TIP (2060M HUB FACE TO HUB FACE)
87", 2210mm TIP TO TIP (2110M HUB FACE TO HUB FACE)
89", 2260mm TIP TO TIP (2160M HUB FACE TO HUB FACE)
91", 2310mm TIP TO TIP (2210M HUB FACE TO HUB FACE)
93", 2360mm TIP TO TIP (2260M HUB FACE TO HUB FACE)
94", 2385mm TIP TO TIP (2285M HUB FACE TO HUB FACE)
96", 2435mm TIP TO TIP (2335M HUB FACE TO HUB FACE)


IN THIS KIT
1X 45MM SQUARE AXLE WITH ELECTRIC BRAKE MOUNTS WELDED TO AXLE, 1400KG RATED. ( AVAILABLE IN 78", 79", 81", 83",85", 87", 89", 91", 93", 94", 96" ( TIP TO TIP) IF YOUR NOT SURE ON YOUR AXLE LENGTH THEN ASK US
1X 45MM SQUARE BARE AXLE , 1400KG RATING
2X 10" ELECTRIC BACKING PLATES WITH WASHERS AND NUTS FOR FIXING TO BRAKE MOUNT (WITH HANDBRAKE LEVERS)
2X 10" ELECTRIC BRAKE DRUMS. (CUPS ALREADY INSERTED INTO DRUMS)
2X LAZY HUBS HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X SLIMLINE BEARING KITS INCLUDING DUST SEALS AND CAPS
ALL WHEEL NUTS
5 LEAF 2 TONNE ROCKER ROLLER LOAD SHARING SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
4X UNIVERSAL FISH PLATES
8X 45MM X 130MM 1/2" U BOLTS
4X AXLE PADS
16X WASHERS AND NUTS FOR U BOLTS
1X 3500KG ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
1X 8 METRE HAND BRAKE CABLE (LET US KNOW IF LONGER IS NEEDED)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING WELD ON PLATE
2X CABLE CLAMPS
4X 12MM HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
ON PURCHASING PLEASE PROVIDE YOUR AXLE LENGTH AND STUD PATTERN


EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES APPROX. 5 DAYS TO ENGINEER
NATURAL FINISH GULL WING AXLES $150 EA
ASSEMBLE OF AXLE $50 PER AXLE
JAPANESE MANUFACTURED BEARINGS $100 (CLICK ON LINK BELOW)

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.