DIY 1400Kg Boat Jet Ski Trailer Kit. Slipper Springs Mechanical Disc, Stub Axles

SKU : 192814242565-6
$670.00

Available



Details

DIY 1400KG SINGLE AXLE BOAT TRAILER KIT
MECHANICAL DISC
45MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S BOX SECTION


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $120 12" DISCS
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$120 12" DISCS


IN THIS KIT
X2 45MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S BOX SECTION WITH 10" DISC MOUNTS WELDED (these are natural finish as they need to be welded into the 50mm RHS)
2X GALVANISED 10" HYDRAULIC BRAKE DISCS. (CUPS ALREADY INSERTED INTO HUBS)
2X S/L BEARING KITS INCLUDING DUST SEALS AND DUST CAPS (MARINE SEALS)
ALL WHEEL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
2X GALVANISED MECHANICAL CALIPERS
4X CALIPER BRAKE PADS
2X 9 LEAF GALVANISED DACROMET SLIPPER SPRINGS. RATED 1600KG PER PAIR (springs are shot peened for extra strength)
2X FRONT SLIPPER HANGERS
2X REAR SLIPPER HANGERS
2X STAINLESS STEEL SLIPPER HANGER BOLTS WITH NUTS AND WASHERS
2X GALVANISED FISH PLATES
4X GALVANISED 50MM X 150MM 1/2" U BOLTS WITH NUTS AND WASHERS
2X GALVANISED AXLE PADS
1X 2000KG DACROMET 4 HOLE OVERRIDE 50MM BALL COUPLING
1X MARINE MECHANICAL BRAKE LEVER (AVAILABLE TO SUIT 100MM OR 75MM WIDE DRAW BAR. 100MM WILL COME STANDARD UNLESS ADVISED OTHERWISE)
STANDARD MECHANICAL A FRAME BASE PLATE CAN BE SUPPLIED ON REQUEST
1X 8 METRES HANDBRAKE CABLE (let us know if longer is required)
1X CABLE ADJUSTER
2 X CABLE CLAMPS
4X HIGH TENSILE COUPLING BOLTS WITH NYLOC NUTS
1X 4 HOLE COUPLING WELD ON PLATE
on ordering please provide you stud pattern?



EXTRAS AVAILABLE
GALVANISED FINISH GULL WING AXLE UPGRADE $180
JAPANESE MANUFACTURED BEARINGS $50 (CLICK ON LINK BELOW)

 

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

  

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.

DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.