7 Leaf 1600Kg Galvanised Dacromet 60mm Eye to Eye Trailer springs, U Bolt & Hanger Kit

DACROMET FINISH 7 LEAF EYE TO EYE SPRINGS SET
INCLUDING HANGER AND U BOLT KIT
Choice or 40mm, 45mm or 50mm U bolts


2X 60MM X 6MM 7 LEAF DACROMET FINISH EYE TO EYE SPRINGS
2X REAR SHACKLE HANGERS. 60mm wide WITH DOUBLE STRENGTH PLATES WELDED
2X FRONT EYE HANGER
2X DOUBLE 5/8" HIGH TENSILE GREASABLE SHACKLE BOLTS
2X 9/16 FRONT HANGER BOLTS with spring washers and nuts
4X 40MM, 45MM OR 50MM SQUARE X 130MM U BOLTS WITH SPRING WASHERS AND NUTS (1/2 BSW) GALVANISED
2X 45 X 50 X 8MM SLOTTED FISH PLATE GALVANISED FINISH
2X GALVANISED AXLE PADS
Please advise on ordering if you require 40mm , 45mm or 50mm U bolts

SPRINGS RATED TO 1600KG PER PAIR
SPRING LENGTH 715MM OVERALL
CENTRE OF EYE TO EYE OF SPRING LENGTH 680MM
CAMBER ARC HEIGHT 135MM. (SPRING ONLY. NOT ASSEMBLED ON HANGERS)
PLEASE NOTE THESE SPRINGS HAVE AN OFFSET CENTRE LOCATION OF 60MM
NYLON BUSH INSERTED
NYLON BUSH SUITS 5/8" OR 16MM BOLTS

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.

DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.

Long Part of spring to the front, move rear hanger 25mm towards the rear,
Centre to centre of the hangers needs to be 25mm greater than centre to centre of the springs