DIY 1400kg Boat Trailer Kit. Hydraulic Disc Brakes Eye to Eye Springs. Axles 78" - 96" Long

SKU : 364253340937-56
$940.00

Available



Details

DIY 1400KG SINGLE AXLE BOAT TRAILER KIT
EYE TO EYE SPRINGS, HYDRAULIC DISC BRAKES
AXLE LENGTHS 78" - 96" (for shorter axles SKU: 171140307495)


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $120 (12" discs)
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$120 (12" discs)

 

AVAILABLE LENGTHS
78", 1980mm TIP TO TIP (1880M HUB FACE TO HUB FACE)
79", 2005mm TIP TO TIP (1905M HUB FACE TO HUB FACE)
81", 2060mm TIP TO TIP (1960M HUB FACE TO HUB FACE)
83", 2110mm TIP TO TIP (2010M HUB FACE TO HUB FACE)
85", 2160mm TIP TO TIP (2060M HUB FACE TO HUB FACE)
87", 2210mm TIP TO TIP (2110M HUB FACE TO HUB FACE)
89", 2260mm TIP TO TIP (2160M HUB FACE TO HUB FACE)
91", 2310mm TIP TO TIP (2210M HUB FACE TO HUB FACE)
93", 2360mm TIP TO TIP (2260M HUB FACE TO HUB FACE)
94", 2385mm TIP TO TIP (2285M HUB FACE TO HUB FACE)
96", 2435mm TIP TO TIP (2335M HUB FACE TO HUB FACE)


IN THIS KIT
1X 45MM SQUARE GALVANISED SOLID AXLE with disc flanges welded. FLANGES ARE WELDED ON GALVANISED AXLE THEN SPRAYED WITH COLD GAL AFTERWARDS. ( AVAILABLE IN 78", 79", 81", 83", 85", 87", 89", 91", 93", 94", 96" ( TIP TO TIP) IF YOUR NOT SURE ON YOUR AXLE LENGTH THEN ASK US FOR ASSISTANCE.
2X 10" GALVANISED HYDRAULIC BRAKE DISCS
2X GALVANISED HYDRAULIC CALIPERS WITH STAINLESS STEEL PISTONS.
4 X CALIPER BRAKE PADS
2X S/L BEARING KITS INCLUDING DUST SEALS AND DUST CAPS (MARINE SEALS)
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
2X 7 LEAF GALVANISED DACROMET 60MM WIDE EYE TO EYE SPRINGS. RATED 1600KG PER PAIR (springs are shot peened for extra strength)
1X 60MM HEAVY DUTY SHACKLE HANGER KIT
2X GALVANISED FISH PLATES
4X GALVANISD 45MM X 150MM 1/2" U BOLTS WITH NUTS AND WASHERS
2X GALVANISED AXLE PADS
1X 2000KG GALVANISED 4 HOLE OVERRIDE 50MM BALL COUPLING
1X 3/4"MASTER CYLINDER WITH STAINLESS STEEL MOUNTING BOLTS
1X GALVANISED MASTER CYLINDER BRACKET
4X HIGH TENSILE COUPLING BOLTS WITH NYLOC NUTS
1X 4 HOLE COUPLING WELD ON PLATE
1X 2500MM COUPLING TO AXLE MAIN FLARED BUNDY LINE WITH NUTS (LET US KNOW IF LONGER IS REQUIRED)
1X 1500MM FLARED BUNDY LINE WITH NUTS
1X 500MM FLARED BUNDY LINE WITH NUTS
1X 400MM MALE / FEMALE FLEXI LINE
1X BRASS T PIECE
1X MASTER CYLINDER NUT AND WASHER
ALL COPPER FITTINGS AND T PIECES TO COMPLETE AXLE AND FINISH OFF AT COUPLING WITH PRE FLARED LINES!!


Please check coupling to axle hydraulic line length. if longer is required please get in contact with us
On ordering please provide your stud pattern and axle length?

  

upgrade to the easy instillation hydraulic line setup.
12ft set up: $70 (CLICK ON LINK BELOW)
16ft set up: $75 (CLICK ON LINK BELOW)

"UPGRADE TO 12FT FULL FLEXI KIT BY CLICKING HERE"

"UPGRADE TO 16FT FULL FLEXI KIT BY CLICKING HERE"   

 

EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE DROP AXLES TAKE APPROX 5 BUSINESS DAYS
ASSEMBLE OF AXLE $50 PER AXLE
UPGRADE TO JAPANESE BEARINGS $40.0 (CLICK ON LINK BELOW)

"CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.