DIY 3200Kg Tandem Trailer Caravan Kit. 10" Electric Brakes. Stub Axles, R/Roller

SKU : 361110223008-3
$1,560.00

Available



Details

DIY TANDEM TRAILER KIT
ROCKER ROLLER LOAD SHARING SUSPENSION, 10" PARALLEL BRAKES
3200KG RATED.


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS) MINIMUM 76MM CENTRE BORE ON RIM REQUIRED
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) MINIMUM 95MM CENTRE BORE ON RIM REQUIRED
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) MINIMUM 108MM CENTRE BORE ON RIM REQUIRED


IN THIS KIT
4 X 50MM X 450MM SQUARE PARALLEL STUB AXLES WITH ELECTRIC BRAKE MOUNTS WELDED TO STUB AXLES, 1600KG RATED PER PAIR
4X 10" ELECTRIC BACKING PLATES WITH WASHERS AND STAR NUTS FOR FIXING TO BRAKE MOUNTS (EACH BACKING PLATE COMES WITH HANDBRAKE LEVERS)
4X 10" PARALLEL ELECTRIC BRAKE DRUMS. (CUPS ALREADY INSERTED INTO DRUMS)
4X PARALLEL BEARING KITS INCLUDING DUST SEALS AND DUST CAPS
ALL WHEEL NUTS
1X 7 LEAF 3.5 TONNE ROCKER ROLLER SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
4X UNIVERSAL EXTRA LARGE FISH PLATES

8X 50MMX 150MM SQUARE HIGH TENSILE U BOLTS (FOR OVERLAY) AS STANDARD
OR
8X 63MMx170MM SQUARE HIGH TENSILE U BOLTS (FOR INSERT AXLE)
KIT WILL COME WITH 50MM U BOLTS UNLESS SPECIFIED BEFORE DISPATCH

4X AXLE PADS
16X SPRING WASHERS AND NUTS FOR U BOLTS
1X 3500KG ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
1X 8 METRES HAND BRAKE CABLE (PLEASE SPECIFY IF LONGER IS NEEDED)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING PLATE
2X CABLE CLAMPS
8 X 1/2" HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
1X BRAKE AWAY UNIT
ON PURCHASING PLEASE PROVIDE YOUR STUD PATTERN


BEARING OPTIONS
UPGRADE TO JAPANESE BEARINGS $100.0 (PLEASE CLICK ON LINK BELOW)

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.