DIY 4000Kg Tandem Trailer Caravan Kit. 12" Electric Brakes. Engineered Axles

SKU : 180730112143-1
$2,550.00

Available



Details

DIY TANDEM TRAILER KIT
4000KG RATED
ROCKER ROLLER LOAD SHARING SUSPENSION, 12 INCH ELECTRIC BRAKES AND 50MM SQUARE 2 TONNE AXLES

STUD PATTERNS AVAILABLE
6 STUD LANDCRUISER (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD LANDCRUISER (5/150 PCD, 9/16" STUDS AND NUTS)

 

AXLE LENGTHS AVAILABLE
PLEASE NOTE: Minimum clearance from hub face to chassis per side: 155mm
Hub face to back of electric backing plate per side: 155mm
1700MM TIP TO TIP (hub face to hub face 1525mm)
1750MM TIP TO TIP (hub face to hub face 1575mm)
1800MM TIP TO TIP (hub face to hub face 1625mm)
1850MM TIP TO TIP (hub face to hub face 1675mm)
1900MM TIP TO TIP (hub face to hub face 1725mm)
1950MM TIP TO TIP (hub face to hub face 1775mm)
2000MM TIP TO TIP (hub face to hub face 1825mm)
2050MM TIP TO TIP (hub face to hub face 1875mm)
2100MM TIP TO TIP (hub face to hub face 1925mm)
2150MM TIP TO TIP (hub face to hub face 1975mm)
2200MM TIP TO TIP (hub face to hub face 2025mm)
2250MM TIP TO TIP (hub face to hub face 2075mm)
2300MM TIP TO TIP (hub face to hub face 2125mm)
2350MM TIP TO TIP (hub face to hub face 2175mm)
2385MM TIP TO TIP (hub face to hub face 2210mm)
2445MM TIP TO TIP (hub face to hub face 2270mm)
2475MM TIP TO TIP (hub face to hub face 2300mm)
CUSTOM AXLE LENGTH UP TO 2500MM TIP TO TIP +$100 PER KIT
Custom Axle lengths will need to be manufactured which will take approx 5 extra business days for dispatch on top of the current dispatch times

THIS KIT IS LEGALLY RATED FOR A TANDEM 4000KG TRAILER.

 

IN THIS KIT
2X 50MM SQUARE 2000KG COMPLETE ASSEMBLED 12" ELECTRIC BRAKED AXLES. 30210 AND 15123 BEARINGS INSTALLED
AXLES TAKE APPROX 5 DAYS TO BE ENGINEERED (available any length up to 2500mm tip to tip / 2325mm hub face to hub face)
1x 8 LEAF 4.0 TONNE LOAD SHARING ROCKER ROLLER SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
8X HEAVY DUTY OFF ROAD UNIVERSAL FISH PLATES
8X 5/8" 50 SQ HIGH TENSILE U BOLTS
4X AXLE PADS
16X WASHERS AND NUTS FOR U BOLTS
1X 4500KG 70MM ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
COUPLING CTA APPROVAL NUMBER: CTA-061054
1X 8 METRES HAND BRAKE CABLE (PLEASE LET US KNOW IF MORE CABLE IS REQUIRED)
1X CABLE ADJUSTER
1X 4 HOLE COUPLING PLATE
2X CABLE CLAMPS
4X 12MM HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
1X BRAKE AWAY UNIT
ON PURCHASING PLEASE PROVIDE YOUR AXLE LENGTH AND STUD PATTERN

Axles In this kit will come assembled saving you much time and headache

 

EXTRAS AVAILABLE
2" OR 4" DROP AXLES $295 EACH AXLE.  drop axles take approx 5 business days
JAPANESE MANUFACTURED BEARINGS $180 (PLEASE CLICK ON LINK BELOW)

 

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.