DIY 4500Kg Tandem Trailer Caravan Kit. 12" Electric Brakes. Engineered Axles

SKU : 190581694219-1
$2,880.00

Available



Details

DIY TANDEM TRAILER KIT
4500KG RATED
ROCKER ROLLER LOAD SHARING SUSPENSION, 12 INCH ELECTRIC BRAKES AND 65MM ROUND 3 TONNE AXLES

AVAILABLE PATTERNS
LANDCRUISER 6 STUD. 6/139.7 PCD. 1/2" STUDS AND NUTS
LANDCRUISER 5 STUD. 5/150 PCD. 9/16" STUDS AND NUTS
FORD F100 / F150 5 STUD. 5/139.7 PCD. 9/16" STUDS AND NUTS
FORD F250 / F350 8 STUD. 8/170 PCD. 14X1.5 STUDS AND NUTS

 

AXLE LENGTHS AVAILABLE
PLEASE NOTE: Minimum clearance from hub face to chassis per side: 170mm
Hub face to back of electric backing plate per side: 170mm
1950MM TIP TO TIP (1770mm hub face to hub face)
2000MM TIP TO TIP (1820mm hub face to hub face)
2050MM TIP TO TIP (1870mm hub face to hub face)
2100MM TIP TO TIP (1920mm hub face to hub face)
2150MM TIP TO TIP (1970mm hub face to hub face)
2200MM TIP TO TIP (2020mm hub face to hub face)
2250MM TIP TO TIP (2070mm hub face to hub face)
2300MM TIP TO TIP (2120mm hub face to hub face)
2380MM TIP TO TIP (2200mm hub face to hub face)
2410MM TIP TO TIP (2230mm hub face to hub face)
2460MM TIP TO TIP (2280mm hub face to hub face)
CUSTOM AXLE LENGTH UP TO 2500MM TIP TO TIP +$100 PER KIT
Custom Axle lengths will need to be manufactured which will take approx 5 extra business days for dispatch on top of the current dispatch times

THIS KIT IS LEGALLY RATED FOR A TANDEM 4500KG TRAILER.

IN THIS KIT
2X 65MM ROUND 3000KG COMPLETE ASSEMBLED 12" ELECTRIC BRAKED AXLES. 30210 INNER AND 29749 OUTER BEARINGS INSTALLED
AXLES TAKE APPROX 5 DAYS TO BE ENGINEERED (available any length up to 2500mm tip to tip / 2320mm hub face to hub face)
1X 9 LEAF 4.5 TONNE LOAD SHARING ROCKER ROLLER SPRING SET WITH ALL GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
8X HEAVY DUTY UNIVERSAL FISH PLATES
8X 5/8" 65MM ROUND HIGH TENSILE U BOLTS
4X AXLE PADS
16X WASHERS AND NUTS FOR U BOLTS
1X 4500KG 70MM ELECTRIC BALL COUPLING WITH HAND BRAKE LEVER
COUPLING CTA APPROVAL NUMBER: CTA-061054
1X 8 METRES HAND BRAKE CABLE (PLEASE LET US KNOW IF MORE CABLE IS REQUIRED)
1X CABLE ADJUSTER
1X 10MM THICK 4 HOLE COUPLING WELD ON PLATE
2X CABLE CLAMPS
4X 12MM HIGH TENSILE BOLTS, NUTS AND WASHERS FOR COUPLINGS
1X BRAKE AWAY UNIT
ON PURCHASING PLEASE PROVIDE YOUR AXLE LENGTH AND STUD PATTERN

Axles In this kit will come assembled saving you much time and headache


BEARING OPTIONS
UPGRADE TO JAPANESE BEARINGS $180.0 (CLICK ON LINK BELOW)
UPGRADE TO 63MM SQUARE SOLID AXLES $200 PER AXLE

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

 

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.