Details
DIY TRI AXLE TRAILER KIT
ROCKER ROLLER LOAD SHARING SUSPENSION, 2 TONNE MACHINED STUB AXLES
4500KG RATED.
Save money on making your own axles and freight costs
Stud Patterns Available
6 STUD LANDCRUISER (6/139.7 PCD, 1/2" STUDS AND NUTS)
5 STUD LANDCRUISER (5/150 PCD, 9/16" STUDS AND NUTS)
IN THIS KIT
6X 50MM X 450MM 2 TONNE SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50MM X 50MM X 5MM RHS SQUARE SECTION WITH 12" ELECTRIC BRAKE MOUNTS WELDED
6X 12" ELECTRIC BACKING PLATES WITH WASHERS AND STAR NUTS FOR FIXING TO BRAKE MOUNTS (EACH BACKING PLATE COMES WITH HANDBRAKE LEVERS)
6X 2 TONNE BEARING KITS INCLUDING DUST SEALS AND DUST CAPS
ALL WHEEL NUTS
1X 9 LEAF 6 TONNE TRI AXLE ROCKER ROLLER SPRING SET WITH GREASABLE SHACKLES AND HANGERS ALREADY ASSEMBLED. RATED 6750KG. (springs are shot peened for extra strength)
6X UNIVERSAL 5/8" OFF ROAD FISH PLATES
16 X 50MMX 170MM SQUARE 5/8" HIGH TENSILE U BOLTS WITH NUTS AND WASHERS
6 X AXLE PADS
1X 4500KG ELECTRIC BALL COUPLING WITH HANDBRAKE LEVER (6000KG RING COUPLING AVAILABLE UPON REQUEST FOR NO EXTRA CHARGE)
COUPLING CTA APPROVAL NUMBER: CTA-061054
1 X 8 METRES HAND BRAKE CABLE (LET US KNOW IF LONGER IS REQUIRED)
1X CABLE ADJUSTER
1X 10MM THICK 4 HOLE COUPLING WELD ON PLATE
2X CABLE CLAMPS
4 X 12MM HIGH TENSILE BOLTS WITH NUTS AND WASHERS FOR COUPLING
1X BRAKE AWAY UNIT
On ordering please supply your stud pattern
EXTRAS AVAILABLE
UPGRADE TO JAPANESE MANUFACTURED BEARINGS $270 (HIGHLY RECOMMENDED)
SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.