DIY 2000Kg Hydraulic Disc Braked Caravan Boat trailer Kit. Slipper Springs Axles 63"-77"

2000KG DIY HYDRAULIC DISC TANDEM TRAILER KIT
SLIPPER SPRINGS, 40MM AXLES
AXLE LENGTHS 63" - 77" (for shorter axles SKU:364253543200)

STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $120 (12" DISCS)
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$120  (12" DISCS)

AVAILABLE LENGTHS
64", 1625MM TIP TO TIP (1525MM HUB FACE TO HUB FACE)
65", 1650MM TIP TO TIP (1550MM HUB FACE TO HUB FACE)
66", 1675MM TIP TO TIP (1575MM HUB FACE TO HUB FACE)
67", 1700MM TIP TO TIP (1600MM HUB FACE TO HUB FACE)
68", 1725MM TIP TO TIP (1625MM HUB FACE TO HUB FACE)
69", 1750MM TIP TO TIP (1650MM HUB FACE TO HUB FACE)
70", 1775MM TIP TO TIP (1675MM HUB FACE TO HUB FACE)
71", 1805MM TIP TO TIP (1705MM HUB FACE TO HUB FACE)
73", 1855MM TIP TO TIP (1755MM HUB FACE TO HUB FACE)
75", 1905MM TIP TO TIP (1805MM HUB FACE TO HUB FACE)
77", 1955MM TIP TO TIP (1855MM HUB FACE TO HUB FACE)

IN THIS KIT
1X 40MM GALVANISED SQUARE AXLE WITH HYDRAULIC FLANGES WELDED ( AVAILABLE IN 63", 64", 65", 66", 67", 68", 69", 70", 71", 73", 75", 77" ( TIP TO TIP) (PLEASE NOTE THE FLANGES ARE WELDED TO AXLE AFTER IT IS GALVANISED AND COLD GALVANISE IS APPLIED WHERE THE FLANGES HAVE BEEN WELDED). RATED 1000KG PER AXLE
1X 40MM GALVANISED SQUARE BARE AXLE. RATED 1000KG PER AXLE
2X GALVANISED HYDRAULIC BRAKE CALIPERS WITH STAINLESS STEEL PISTONS
4X BRAKE PADS
2X 10" GALVANISED DACROMET HYDRAULIC BRAKE DISCS. (CUPS ALREADY INSERTED INTO DRUMS)
2X GALVANISED DACROMET LAZY HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X LM BEARING KITS INCLUDING MARINE SEALS AND DUST CAPS
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
4X 6 LEAF GALVANISED DACROMET SLIPPER SPRINGS. RATED 1200KG PER PAIR (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT SLIPPER HANGERS
2X REAR SLIPPER HANGERS
2X MIDDLE LARGE SLIPPER HANGERS
4X STAINLESS STEEL SLIPPER HANGER BOLTS WITH NUTS AND WASHERS
4X GALVANISED FISH PLATES
8X GALVANISED 40MM X 150MM 1/2" U BOLTS WITH NUTS AND WASHERS
4X GALVANISED AXLE PADS
1X 2000KG GALVANISED OVERRIDE 50MM BALL COUPLING
1X 3/4 GALVANISED MASTER CYLINDER BRACKET
1X 3/4 MASTER CYLINDER WITH STAINLESS STEEL MOUNT BOLTS
1X 4 HOLE COUPLING PLATE
4X HIGH TENSILE COUPLING BOLTS AND NYLOC NUTS
1X 2500MM COUPLING TO AXLE MAIN FLARED BUNDY LINE WITH NUTS (LET US KNOW IF LONGER IS REQUIRED)
1X 1500MM FLARED BUNDY LINE WITH NUTS
1X 500MM FLARED BUNDY LINE WITH NUTS
1X 400MM MALE / FEMALE FLEXI LINE
1X BRASS T PIECE
1X MASTER CYLINDER NUT AND WASHER
ALL COPPER FITTINGS AND T PIECES TO COMPLETE AXLE AND FINISH OFF AT COUPLING WITH PRE FLARED LINES!!

EXTRAS AVAILABLE
JAPANESE MANUFACTURED BEARINGS $100 (CLICK ON LINK BELOW)
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES TAKE APPROX 5 BUSINESS DAYS TO ENGINEER
ASSEMBLE OF AXLE $50 PER AXLE
GALVANISED GULLWING AXLES $180 EACH 
UPGRADE TO 12FT RUBBER FLEXI LINE KIT $70
UPGRADE TO 16FT RUBBER FLEXI LINE KIT $75
UPGRADE TO STAINLESS 12FT FLEXI LINE KIT $90
UPGRADE TO 16FT STAINLESS FLEXI LINE KIT $105
STAINLESS STEEL HUNTSMAN DISCS AND CALIPERS $POA

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.


DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.