DIY 2000Kg Hydraulic Disc Braked Boat trailer Kit. Stub Axles, Slipper Springs

DIY 2000KG HYDRAULIC DISC TANDEM TRAILER KIT
SLIPPER SPRINGS
SPECIALLY MACHINED STUBS TO SLEEVE INTO 50MM R.H.S


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $120 12" DISCS
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$120 12" DISCS

IN THIS KIT
2X 45MM X 250MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S WITH 10" HYDRAULIC DISC MOUNTS WELDED
2X 45MM X 250MM SQUARE SOLID STUB AXLES MACHINED TO SLEEVE INTO 50X50X5MM R.H.S
2X GALVANISED HYDRAULIC BRAKE CALIPERS WITH STAINLESS STEEL PISTONS
4X BRAKE PADS
2X 10" GALVANISED DACROMET HYDRAULIC BRAKE DISCS. (CUPS ALREADY INSERTED INTO DRUMS)
2X GALVANISED DACROMET LAZY HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X SLIMLINE BEARING KITS INCLUDING MARINE SEALS AND DUST CAPS
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
4X 6 LEAF GALVANISED DACROMET SLIPPER SPRINGS. RATED 1200KG PER PAIR (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT SLIPPER HANGERS
2X REAR SLIPPER HANGERS
2X MIDDLE LARGE SLIPPER HANGERS
4X STAINLESS STEEL SLIPPER HANGER BOLTS, NUTS AND WASHERS
2X GALVANISED FISH PLATES
4X GALVANISED 50MM X 150MM 1/2" U BOLTS WITH NUTS AND WASHERS
2X GALVANISED AXLE PADS
1X 2000KG GALVANISED OVERRIDE 50MM BALL COUPLING
1X 3/4 MASTER CYLINDER BRACKET
1X 3/4 MASTER CYLINDER WITH MOUNT BOLTS
1X 4 HOLE COUPLING WELD ON PLATE
4X HIGH TENSILE COUPLING BOLTS AND NUTS
1X 2500MM COUPLING TO AXLE MAIN FLARED BUNDY LINE WITH NUTS (LET US KNOW IF LONGER IS REQUIRED)
1X 1500MM FLARED BUNDY LINE WITH NUTS
1X 500MM FLARED BUNDY LINE WITH NUTS
1X 400MM MALE / FEMALE FLEXI LINE
1X BRASS T PIECE
1X MASTER CYLINDER NUT AND WASHER
ALL COPPER FITTINGS AND T PIECES TO COMPLETE AXLE AND FINISH OFF AT COUPLING WITH PRE FLARED LINES!!

Please check coupling to axle hydraulic line length. if longer is required please get in contact with us
On ordering please provide your stud pattern?


EXTRAS AVAILABLE
JAPANESE MANUFACTURED BEARINGS $100 (CLICK ON LINK BELOW)
GALVANISED GULLWING AXLES $180 EACH
UPGRADE TO 12FT RUBBER FLEXI LINE KIT $70
UPGRADE TO 16FT RUBBER FLEXI LINE KIT $75
UPGRADE TO STAINLESS 12FT FLEXI LINE KIT $90
UPGRADE TO 16FT STAINLESS FLEXI LINE KIT $105
STAINLESS STEEL HUNTSMAN DISCS AND CALIPERS $POA

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.


DACROMET®
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder.