DIY 2000Kg Mechanical Disc Braked Caravan Boat trailer Kit. Slipper Springs, Axles 63" - 77"

2000KG DIY MECHANICAL DISC TANDEM TRAILER KIT
SLIPPER SPRINGS, 45MM AXLES
AXLE LENGTHS 63" - 77" (for longer axles SKU: 364254936871)


STUD PATTERNS AVAILABLE
FORD (5/114.3 PCD, 1/2" STUDS AND NUTS)
COMMODORE (5/120 PCD, 7/16" STUDS AND NUTS)
HQ (5/120.65 PCD, 7/16" STUDS AND NUTS)
HT (5/108 PCD, 7/16" STUDS AND NUTS)
6 STUD L/C (6/139.7 PCD, 1/2" STUDS AND NUTS) + $120 12" DISCS
5 STUD L/C (5/150 PCD, 9/16" STUDS AND NUTS) +$120 12" DISCS

IN THIS KIT
1X 40MM GALVANISED SQUARE AXLE WITH MECHANICAL FLANGES WELDED ( AVAILABLE IN 63" 64", 65", 66", 67", 68", 69",70", 71", 73", 75", 77" ( TIP TO TIP) (PLEASE NOTE THE FLANGES ARE WELDED TO AXLE AFTER IT IS GALVANISED AND COLD GALVANISE IS APPLIED WHERE THE FLANGES HAVE BEEN WELDED) RATED 1000KG
1X 40MM GALVANISED SQUARE BARE AXLE. RATED 1000KG
2X GALVANISED MECHANICAL BRAKE CALIPERS
4X BRAKE PADS
2X 10" GALVANISED DACROMET BRAKE DISCS. (CUPS ALREADY INSERTED INTO DRUMS)
2X GALVANISED DACROMET LAZY HUBS (CUPS ALREADY INSERTED INTO DRUMS)
4X LM BEARING KITS INCLUDING MARINE SEALS AND DUST CAPS
ALL WHEEL NUTS TO SUIT STUD PATTERN PROVIDED
4X 6 LEAF GALVANISED DACROEMT SLIPPER SPRINGS. RATED 1200KG PER PAIR (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)
2X FRONT SLIPPER HANGERS
2X REAR SLIPPER HANGERS
2X MIDDLE LARGE SLIPPER HANGERS
4X STAINLESS STEEL SLIPPER HANGER BOLTS WITH NUTS AND WASHERS
4X GALVANISED FISH PLATES
8X GALVANISED 40MM X 150MM 1/2" U BOLTS WITH NUTS AND WASHERS
4X GALVANISED AXLE PADS
1 GALVANISED DACROMET 2000Kg 50MM OVERRIDE COUPLING
1X MARINE MECHANICAL BRAKE LEVER (AVAILABLE TO SUIT 100MM OR 75MM WIDE DRAW BAR. 100MM WILL COME STANDARD UNLESS ADVISED OTHERWISE)
1x 8 METRES 4MM BRAKE CABLE (PLEASE LET US KNOW IF LONGER IS REQUIRED)
1X CABLE ADJUSTER
2X CABLE CLAMPS
1X 4 HOLE WELD ON COUPLING PLATE
4X COUPLING HIGH TENSILE BOLTS WITH NYLOC NUTS
On ordering please provide your stud pattern and axle length?


EXTRAS AVAILABLE
JAPANESE MANUFACTURED BEARINGS $100 (CLICK ON LINK BELOW)
2" OR 4" DROP AXLES $295 EACH AXLE. DROP AXLES TAKE APPROX 5 BUSINESS DAYS TO ENGINEER
ASSEMBLE OF AXLE $50 PER AXLE
GALVANISED GULLWING AXLES $180 EACH

 "CLICK HERE TO UPGRADE TO JAPANESE MANUFACTURED BEARINGS"

DACROMET
DACROMET®, is the leading inorganic coating commonly specified in the wind turbine, heavy truck, marine, agricultural, construction equipment and aerospace industries. A water-based, VOC-compliant coating, DACROMET® is comprised mainly of overlapping zinc and aluminum flake in an inorganic binder


SHOT PEENING
Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation. Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.